-
Hot
Dynamic classifier
DCC Dynamic Classifier Our patented DCC series of dynamic classifiers are so-called air classifiers or turbo classifiers. The wide range of cut points and easy and exact adjustment of the cut point let this type of air classifiers dominate the market of powder processing for almost every product. A further advantage is the “hard classifying characteristic”. That means, by variations of the feed rate the cut point almost does not shift. This performance predestines the dynamic classifier to be used in grinding-classifying-circuits. It has the following advantages: -Airborne principle of design -The cut point does not shift even if the feeding is fluctuated. -Clean cut point without oversize particles -Easy adjustment of cut point -Suitable almost for all kinds of powders classification Technical data: The feed rate is in a range of 0.3t – 20t/h The cut point ranging from D97 3µm-150µm Application: mineral fillers, chemicals, pigments, quartz, abrasives, ceramic, fly ash, metal powder, graphite, mica, foodstuff, pharmacy…etc.
Send Email Details -
universal classifier
Universal Classifier The universal classifier belongs to the category of so-called air classifiers or turbo classifiers. It uses airborne principle to transport the feed material into the classifying chamber where a rotating wheel is installed. This type of classifier makes a wide range of cut points and easy and exact adjustment of the cut point by variation of the classifying wheel speed. Therefore, this type of classifiers dominates the market of powder processing for almost every product. A further advantage is that this type of classifier is characterized with “hard classifying features”. That means, the fluctuation of the feed rate almost does not shift the cut point. This performance predestines this type of classifier to be used with a grinder to form a grinding-classifying-circuit. It has the following advantages: -Airborne principle of design. The feed material transported pneumatically into the classifier chamber -The cut point does not shift even if the feeding is fluctuated. -because of optimal double sealing the product always has a clean cut point without oversize -Easy adjustment of cut point by the speed of the rotor controlled with frequency converter -Suitable almost for classification of all kinds of powders - Easy operation with low maintenance cost. Technical data: The feed rate is in a range of 0.3t – 20t/h The cut point ranging from D97 3µm-150µm Application: It is nearly applied to all kinds of powder products, suc has mineral fillers, chemicals, pigments, quartz, abrasives, ceramic, fly ash, metal powder, graphite, mica, foodstuff, pharmacy…etc.
Send Email Details -
turbo classifier
The turbo classifiers belong to so-called air classifiers or dynamic classifier. It consists three parts: the classifier chamber at the top with one wheel of vertical arrangement, the secondary air inlet in the middle and the lower part, a cone for feeding and discharging of the reject. Owing to the double sealing there is no oversize particles in the products. Meanwhile, the wide range of cut points are easily and exactly adjusted by the speed of the wheel control with a frequency converter. Therefore this type of air classifiers dominate the market of powder processing for almost every product. A more important advantage is the “hard classifying characteristic”. That means, even though variations of the feed rate occurs the cut point almost does not shift. This performance predestines the turbo classifier to be used in grinding-classifying-circuits. Technical data: The feed rate is in a range of 0.3t – 20t/h The cut point ranging from D97 3µm-150µm Applications: Mineral fillers, chemicals, pigments, paint, toner, silica, ceramic, abrasives, metal powder, foodstuff, pharmaceuticals, fly ash, solid waste...almost all kind dry powders products.
Send Email Details -
Single Wheel Classifier
The single wheel classifier The single wheel classifier is our new invention. It belongs to air classifier category. The classifying wheel is driven directly or by belt decided according to the motor size. The prominent advantage is the “hard classifying characteristic”. That means even though the fluctuation of the fed material the cut point of the product dose not shift, therefore, this kind of single wheel classifier shows a good combination with a grinding machine. Additionally, the single wheel classifier presents a wide range of cut points, which can be adjusted easily and exactly with frequency converter. Owing to the optimized sealing technology the products always have a sharpness of cut point without oversize particles. The singe wheel classifier has found wide application in powder industry. The advantages: -The cut point is adjusted easily via frequency converter -Double sealing design guarantees clear cut point without oversize particles -Dominating the power classification market and usable for a variety of different materials. -The most important point is “hard classification characteristics”, that means the variation of feed rate does not shift the cut point. -To work with a ball mill to form a grinding and classifying system to increase the grinding efficiency -Simple structure for easy operation and maintenance -Sturdy structure ensures durability and long-time service Application: The single wheel classifier characterized by exact cut point and easy operation dominates the classifier market almost covering all kinds of powder products.
Send Email Details -
ultra-big classifier
The ultra-big classifier is designed for large mass flow rates, it offers high processing volumes. Users dealing with mineral fillers, cement additives, fly ash, slags, industrial solid waste and so on require large quantity of products to fulfill their production needs. The ultra-big classifier just satisfies the demand. The innovative design classifier wheels with guide vanes enhances the dispersion and classification efficiency. This ultra-big classifier is designed to handle fine or medium coarse products. With optimized sealing device there is no oversize in the output. The fine powder outlet employs a dual channel system for fast discharging the product to ensure complete smooth process. The ultra-big classifier exhibits the following advantages: -Large air flow rate brings about large quantity output -The product fineness is ranging from fine to medium coarse -Hard classification characteristics, ie. only minimal shift in the cut point despite feed variations. The processing capacity ranges from 25 to 200 tons per hour, with a cut range of D97 25-200 microns. It is suitable for classifying fly ash, slags, fine cement, coal powder, material fillers, construction waste and tailings.
Send Email Details -
BSC Basket separator
BCS Basket Separator The BCS separators are equipped with a rotating basket. Similar to the DCC series of dynamic classifier, the cut point is adjusted by the speed of the rotating basket, which guaranties a “hard classifying characteristic”. That means, by variations of the feed rate the cut point does not shift. These basket separators are designed to handle high air flow rates with big mass, with a target to classifying large quantity of fine or medium coarse products, such as fly ash, slags, fine-cement, mineral fillers, tailing from ore dressing, industrial solid waste etc. The advantage: -Capability to handle a variety of products with feed rate from 30t to 200t per hour. -Guide vanes leading to efficient dispersion and efficient classification. -Optimal sealing guarantees sharp cut point and prevents from oversize particles. -Hard classifying characteristics stabilizing the set cut point. Technical data: The feed rate is in a range of 25-200t/h The cut point ranges from D97 25µm -200µm Application： mineral fillers, fly ash, slags, construction material, solid waste, fine cement … etc.
Send Email Details
