-
Hot
Dynamic classifier
DCC Dynamic Classifier Our patented DCC series of dynamic classifiers are so-called air classifiers or turbo classifiers. The wide range of cut points and easy and exact adjustment of the cut point let this type of air classifiers dominate the market of powder processing for almost every product. A further advantage is the “hard classifying characteristic”. That means, by variations of the feed rate the cut point almost does not shift. This performance predestines the dynamic classifier to be used in grinding-classifying-circuits. It has the following advantages: -Airborne principle of design -The cut point does not shift even if the feeding is fluctuated. -Clean cut point without oversize particles -Easy adjustment of cut point -Suitable almost for all kinds of powders classification Technical data: The feed rate is in a range of 0.3t – 20t/h The cut point ranging from D97 3µm-150µm Application: mineral fillers, chemicals, pigments, quartz, abrasives, ceramic, fly ash, metal powder, graphite, mica, foodstuff, pharmacy…etc.
Send Email Details -
The lab Desk Classifying Unit
The Lab Desk Classifying Unit is an advanced and versatile equipment designed specifically for particle classification and analysis in laboratory settings. It consists of a complete classifying system, which is composed of one dosing screw, one dynamic classifier，one static classifier and a filter followed by a high pressure fan. The Classifying Test Station is absolutely necessary for new material development and scientific researchers involved in various industries, including, materials science, pharmaceuticals and chemical engineering and environmental monitoring...etc. With its advanced technology and robust design, the Lab Desk Classifying Unit provides accurate and reliable results, enabling users to make informed decisions in either engineering or research project. The Lab Desk Classifying Unit can be used not only for classifying test and new material researches, but also for production of high value-added products, such as metal powder, toners and chemicals...etc. Furthermore, by one step of classification on this test station the users can achieve products of special particle size distribution for specific application. Cut point: D97 3-120 µm feed rate: 50-500kg/h Application: For classification of almost any kind of powder products.
Send Email Details -
turbo classifier
The turbo classifiers belong to so-called air classifiers or dynamic classifier. It consists three parts: the classifier chamber at the top with one wheel of vertical arrangement, the secondary air inlet in the middle and the lower part, a cone for feeding and discharging of the reject. Owing to the double sealing there is no oversize particles in the products. Meanwhile, the wide range of cut points are easily and exactly adjusted by the speed of the wheel control with a frequency converter. Therefore this type of air classifiers dominate the market of powder processing for almost every product. A more important advantage is the “hard classifying characteristic”. That means, even though variations of the feed rate occurs the cut point almost does not shift. This performance predestines the turbo classifier to be used in grinding-classifying-circuits. Technical data: The feed rate is in a range of 0.3t – 20t/h The cut point ranging from D97 3µm-150µm Applications: Mineral fillers, chemicals, pigments, paint, toner, silica, ceramic, abrasives, metal powder, foodstuff, pharmaceuticals, fly ash, solid waste...almost all kind dry powders products.
Send Email Details -
Single Wheel Classifier
The single wheel classifier The single wheel classifier is our new invention. It belongs to air classifier category. The classifying wheel is driven directly or by belt decided according to the motor size. The prominent advantage is the “hard classifying characteristic”. That means even though the fluctuation of the fed material the cut point of the product dose not shift, therefore, this kind of single wheel classifier shows a good combination with a grinding machine. Additionally, the single wheel classifier presents a wide range of cut points, which can be adjusted easily and exactly with frequency converter. Owing to the optimized sealing technology the products always have a sharpness of cut point without oversize particles. The singe wheel classifier has found wide application in powder industry. The advantages: -The cut point is adjusted easily via frequency converter -Double sealing design guarantees clear cut point without oversize particles -Dominating the power classification market and usable for a variety of different materials. -The most important point is “hard classification characteristics”, that means the variation of feed rate does not shift the cut point. -To work with a ball mill to form a grinding and classifying system to increase the grinding efficiency -Simple structure for easy operation and maintenance -Sturdy structure ensures durability and long-time service Application: The single wheel classifier characterized by exact cut point and easy operation dominates the classifier market almost covering all kinds of powder products.
Send Email Details -
ultra-fine classifier
Ultra-fine Classifier With the rapid development of powder technology the powder products, particularly the mineral fillers are required finer and finer. Apart from the mills that have to be improved to bring about more and more fines, an ultra-fine classifier is also the key part to take out the fines from the ground material as much as possible. Facing the market challenge we optimizes the details of our dynamic classifier to realize the purposes. As we know the fineness of product depends on the speed of the classifier wheels whereas the output is determined by the surface of the wheel. So we integrate numerous classifying wheels in horizontal arrangement that are controlled by a single frequency converter. This innovated ultra-fine classifier contributes a high throughput of superfine products. The ultra-fine classifier is characterized by -Sharp cut point without oversize in the product -Easy adjustment of cut point by variation of the wheel speed. -Numerous wheels in one classifier for high throughput. -Easy operation with high performance. Application: Mineral fillers, chemicals, pharmeceuticals, pigments, toner, cosmetics, foodstuff, graphite, mica,..etc. Technical data: The cut point ranging from D97 4-200µm The feed rate ranging from 1-50t/h
Send Email Details -
Laboratory Classifying Unit
Laboratory Classifying Unit The Laboratory Classifying unit is an advanced and versatile equipment designed specifically for particle classification and analysis in laboratory settings. It serves as an essential tool for engineering and scientific researchers involved in various industries, including, materials science, chemical engineering, pharmaceuticals, environmental monitoring, and chemical engineering...etc. With its cutting-edge technology and robust design, the Laboratory Classifying unit delivers accurate and reliable results, enabling users to make informed decisions and drive innovation in their respective fields. Apart from classifying test the unit can also be used for production of small amount high value-added products. Technical Data: Range of cut point: D97 3μm - 75μm Feed rate: 20kg-200kg/h Application: Suitable for classifying test almost all kinds of powder products to get a variety of cut points and particle size distribution.
Send Email Details -
Classifying Test Station
The Classifying Test Station is an advanced and versatile equipment designed specifically for particle classification and analysis in laboratory settings. It consists of a complete classifying system, which is composed of one dosing screw, one dynamic classifier，one static classifier and a filter followed by a high pressure fan. The Classifying Test Station is absolutely necessary for both new material development and scientific researchers involved in various industries, which include materials science, pharmaceuticals and chemical engineering and environmental monitoring...etc. With our innovative dynamic and static classifiers and operating procedure , by one step of classification on this test station the users can achieve products of special particle size distribution for specific application. The Classifying Test Station provides accurate and reliable results that enable the users to make informed decisions in either engineering or new material research project. Moreover, our Classifying Test Station can be used not only for classifying test and new material researches, but also for production of high value-added products, such as metal powder, toners and chemicals...etc. Therefore this classifying test station is the best of both worlds. Cut point: D97 3-120 µm feed rate: 50-500kg/h Application: For classification of almost any kind of powder products with sharp cut point and desired particle size distribution..
Send Email Details -
Laboratory classifier
Laboratory Classification Unit The Laboratory classifying unit consists of a complete classifying system, which has a dosing screw, one dynamic classifier，one static classifier and one filter followed by a high pressure fan. The laboratory classifying unit can be used not only for classifying test, but also for classification of highly value-added products, such as metal powder, toners and chemicals. The cut point ranges from D97 3μm - 75μm. Furthermore, by one step of classification this laboratory classification unit can achieve products of special particle size distribution. The laboratory classification unit is made of stainless steel and easy to be cleaned. Sturdy structure ensures long service life. Technical Data: Range of cut point: D97 3μm - 75μm Feed rate: 20kg-1000kg/h Application: It is used for development of new products by laboratory test. I also used in production of high-value-add products such as metal powder, toners, pigments, chemicals …etc.
Send Email Details
