SSC static classifier
Brand IVA Shanghai
Product origin Shanghai
Delivery time 90 days
Supply capacity 20
The SSC Static Classifier
The SSC static classifier is a newly developed classifier with free vortex flow. As its name indicates, there are no rotating parts. Therefore, it is easy to be wear-protected for hard mineral processing. The classifier users find that the high-speed rotors are damaged easily under strong impact and abrasion, consequently, contaminating the products. This static classifier is approved to be the best solution for eliminating contamination. Furthermore, the optimized design of spiral flow and rinsing air guarantee the output of fine products free from oversize particles as well as coarse fraction clean. The SSC static classifiers can achieve a sharpness of cut point nearly as good as much more expansive multi-wheel classifier.
The advantages as follows:
-This classifier has neither rotor nor motor: low investment
-Static classifier has no motor: low running cost
- Easy to be protected with ceramic tiles or PU for iron-free production.
-Easy maintenance on-site: low maintenance fee.
-Sharpness of cut point as good as those of the most expensive multi-wheel classifier.
- For fines collection a cyclone is sufficient, filters are not necessary.
In the classifying process this kind is often used for taking away the dust from the end product to get clean particles. It is also used to separate the small amount of very big particles from the fines. When it is used for pre-classification it can optimize the main classifying process by rejecting either fines or coarse resulting in high classifying efficiency.
Applications:
•Suitable for classifying hard minerals, such as silica, quartz, pegmatite, feldspar, granite, ceramics…etc.
•Suitable for classifying food stuff or spices particularly those with high content of fat.
•Suitable for classification of flaky particles i.e. flaky metal effect pigments, talc, graphite ...etc.
•Working in high temperature conditions which classifier with wheels cannot stand.
Technical data:
The feed rate is in a range of 20kg to 12000kg/h
The cut point ranges from D97 5µm-120µm
The features:
· The static classifier consists of two parts: the classifying chamber with material inlet and fines outlet at the top and the product collection cone with secondary air inlet below the classifying chamber.
· It has neither rotor nor motor.
· It is easy to be wear protected with ceramic tiles or PU, particularly for hard mineral processing to get iron-free product.
· Simple structure and easy repairing on-site saves maintenance time and cost.
· This static classifier covers a wide range of cut points by simple adjustment.
· The static classifier can achieve a sharpness of a cut nearly as good as those produced by much more expansive multi-wheel classifier.
· The static classifier can be in line with a dynamic classifier to perform two-stage classification.
