-
ultra-big classifier
The ultra-big classifier is designed for large mass flow rates, it offers high processing volumes. Users dealing with mineral fillers, cement additives, fly ash, slags, industrial solid waste and so on require large quantity of products to fulfill their production needs. The ultra-big classifier just satisfies the demand. The innovative design classifier wheels with guide vanes enhances the dispersion and classification efficiency. This ultra-big classifier is designed to handle fine or medium coarse products. With optimized sealing device there is no oversize in the output. The fine powder outlet employs a dual channel system for fast discharging the product to ensure complete smooth process. The ultra-big classifier exhibits the following advantages: -Large air flow rate brings about large quantity output -The product fineness is ranging from fine to medium coarse -Hard classification characteristics, ie. only minimal shift in the cut point despite feed variations. The processing capacity ranges from 25 to 200 tons per hour, with a cut range of D97 25-200 microns. It is suitable for classifying fly ash, slags, fine cement, coal powder, material fillers, construction waste and tailings.
Send Email Details -
BSC Basket separator
BCS Basket Separator The BCS separators are equipped with a rotating basket. Similar to the DCC series of dynamic classifier, the cut point is adjusted by the speed of the rotating basket, which guaranties a “hard classifying characteristic”. That means, by variations of the feed rate the cut point does not shift. These basket separators are designed to handle high air flow rates with big mass, with a target to classifying large quantity of fine or medium coarse products, such as fly ash, slags, fine-cement, mineral fillers, tailing from ore dressing, industrial solid waste etc. The advantage: -Capability to handle a variety of products with feed rate from 30t to 200t per hour. -Guide vanes leading to efficient dispersion and efficient classification. -Optimal sealing guarantees sharp cut point and prevents from oversize particles. -Hard classifying characteristics stabilizing the set cut point. Technical data: The feed rate is in a range of 25-200t/h The cut point ranges from D97 25µm -200µm Application： mineral fillers, fly ash, slags, construction material, solid waste, fine cement … etc.
Send Email Details
